Fast-setting urethane adhesive designed to bond steel, aluminum and urethane shoes to the hoof and to fabricate large and small hoof wall repairs.
• For use as adhesive
• 4 week average for glue-on urethane shoes
• Initial set time of 1 minute and final cure time of 6 minutes
• Perfect for most every hoof repair application
• Adhere™ sets hard with a superior bond, but maintains the flexibility necessary at the quarters and heels to allow the natural movement of the hoof
Cartridge Basics & Directions To achieve optimal results when applying pour-in pad materials, consider these tips when preparing cartridges: • Remove the outer cap from the cartridge. Keep the cap to apply after product is applied. • Open the cartridge by pushing the tip down on a firm surface. • Pull up on the cartridge and then backwards to remove the tip. • Insert cartridge into the dispensing gun with label side up. • Squeeze out a small amount to ensure both sides dispense evenly. • Attach a mixing tip by pressing the tip to the dispensing gun and twisting clockwise. • Apply the pour-in pad material to the hoof cavity. VIDEO VIDEO VIDEO
Learn what Adhere is used for VIDEO
Learn to use Adhere to glue on a shoe. VIDEO
Learn how to repair with Adhere VIDEO
Learn the professional techniques of using Adhere combined with Equi-Pak|CS.